How to Transfer Data Using a LAN cable on 2 computers

How to Transfer Data Using a LAN cable on 2 computers

CABLE LAN:
Stages:
1. Prepare 2 computer is on
2. Prepare a LAN Cable
3. Plug one end of the LAN on the computer, and the other 2 computers. If it is correct, the indicator will light up in both holes LAN.
4. When ready, on the second computer, enter the Start Menu >> Settings >> Network Connections >> Local Area Connection
5. If it is opened, in General, locate and click 2 times the Internet Protocol (TCP / IP)
6. If suda open, click Use the following IP Address on both computers.
7. On the first computer, enter the IP Address:
IP Address: 192.168.0.1
Subnet mask: 255.255.255.0
OK
8. On the second computer, enter the IP Address:
IP Address: 192.168.0.2
Subnet mask: 255.255.255.0
OK
9. Next, create a folder on the computer 2, for example, was named "FILE 1". Then right-click the folder, select Properties
Select the Sharing
In Network Sharing and Security,
Tick ​​Share this folder on the work
Tick ​​the Allow network users to change my files.
OK
If it is successful, the folder is usually changed hands so no pictures
10. Before you send data from one computer, turn off FIREWALL
How:
Start menu >> Settings >> Control Panel
Select Windows Firewall
click Off
OK
Well, now dead, get ready to send data.
11. On the first computer, open Windows Explorer or Internet Explorer buddy, type the Ip address Address (192.168.0.2) computer 2. Type: \ \ 192.168.0.2 in the address (above).
If it is true, on one computer, you will get a folder you have created on your computer and shared two earlier (FILE folder 1). From the computer first, my friend lived move / transfer files / data as much as possible to MOVE folder earlier.